Allied Telesis x530 Series User Manual

Chapter 7: Building the Trunk with the Default SFP+ S1 and S2 10Gbps Stacking Ports
148
5. Connect the power cords to appropriate AC power sources. Refer to
Figure 59.
6. Repeat this procedure to connect the second power cord to the switch.
Figure 59. Plugging in the AC Power Cord to an AC Sources
7. Wait two minute for the switch to initialize its management software.

Allied Telesis x530 Series Specifications

General

Brand	Allied Telesis
Model	x530 Series
Category	Switch
Language	English