Allied Telesis x530 Series User Manual

x530 Series Installation Guide for Virtual Chassis Stacking
23
SFP/SFP+
Transceiver Ports
The SFP transceivers slots (ports 1 to 24) on the x530-28GSX switch
support the following types of transceivers:
 100Mbps/1Gbps SFP transceivers
The four SFP+ transceiver slots in the x530-28GTXm, x530-28GPXm, and
x530-28GSX switches (ports 25-28), and x530-52GTXm and x530-
52GPXm switches (ports 49-52) support the following types of
transceivers:
 1Gbps SFP transceivers
 10Gbps SFP+ transceivers
The SFP+ transceiver ports on the x530-28GSX switch support 10Gbps
BiDi transceivers.
An example of SFP 100Mbps/1Gbps transceivers include:
 SPFX series are 100Mbps supported SFP transceivers.
 SPSX and LR short and long distance transceivers using multi-
mode or single mode fiber optic cable.
 SPBD series of bidirectional transceivers with maximum distances
of 10 and 40 kilometers.
Examples of SFP+ 10Gbps transceivers include:
 SP10BD bidirectional transceivers for single mode fiber optic cable
with a maximum distance of 10 kilometers.
 SP10SR, LR, ER and ZR series of short or long distance
transceivers using multi-mode or single mode fiber optic cable.
 SP10TM 1/2.5/5/10G transceiver with RJ-45 connector for a
copper link of up to 30m with Category 6a or 7 cable, or 100m with
Category 5e cable up to 5G.
 SP10T transceiver with RJ-45 connector for links up to 20 meters
at 10Gbps with Category 6a or better copper cable, or 100 meters
at 1Gbps.
Note
SFP and SFP+ transceivers must be purchased separately. For a
list of supported transceivers, contact your Allied Telesis distributor
or reseller.
Note
Industrial (-40 to 85° C) and extended (-40 to 105° C) temperature
transceivers are available.

Allied Telesis x530 Series Specifications

General

Brand	Allied Telesis
Model	x530 Series
Category	Switch
Language	English