Amada ML-2050A-CE - default chapter; How to Use this Document

2
ML-2050A/2051A/2150A
How to Use This Document
ATTENTION
In this manual, ML-2050A denotes ML-2050A-CE; ML-2051A, ML-2051A-CE; and
ML-2150A, ML-2150A-CE.
Thank you for purchasing our YAG Laser Welder ML-2050A/2051A/2150A.
This operation manual explains its method of operation and precautions for use.
Before using, read this operation manual carefully; after reading, save it in a proper
place for your future reference.
This document is composed of the 4 parts of "Introduction Part", "Installation and
Preparation Part", "Operating Part", and "Maintenance Part", and "Appendixes."
We recommend inexperienced users to read through the whole contents starting from
"Introduction Part."
This document allows the user to understand the whole equipment image, basic
conguration, and how to use the laser.
Experienced users can refer to the desired page from the table of contents.
Organization of This Document and Its Contents
Introduction Part: Explains the outline and functions of the laser. Regarding the YAG
Laser, this part explains the basic configuration and functional
outline of this product including options so that the user can know
the conguration of the laser and equipment composition, and also
the name and function of each component section.
Installation and
Preparation Part:
Explains the installation of the laser and preparatory operations
such as connections of its respective sections.
Operating Part: Explains how to operate the laser. First, this part explains how to
perform each setting and how to operate the laser. Three types
of control (control by control panel, control by external input/
output signals, and control by external communication control) are
explained in the operating method for laser welding.
Maintenance Part: Explains how to perform maintenance and how to handle trouble.
Appendixes: For reference materials, specications, dimensional outline drawing,
available output, timing chart, and list of terminology are available.
In the output schedule data entry table, the user can enter
registered laser output schedule data for use.