Amada ML-2050A-CE - Options

22
ML-2050A/2051A/2150A
4. Product Composition
Options
The following goods are options separately sold. Purchase them as required.
Part name Model No.
Fiber scope FOS-04
Laser controller MLE-115A-02-00
Circuit cable
3 m C18-HD15M-HD15F-10
15 m C18-HD15M-HD15F-50
Printer BL2-58SNWJC
RS-232C/RS-485 conversion adapter MSC-08S
AC adapter for RS-232C/RS-485 conversion
adapter
Exclusively for MSC-08
RS-485 cable, 10 m A-05391-001
RS-232C cable, 0.2 m KRS-9F25F02K
End face checker EC-02(LED)(50)
Output unit with ber sensor Please contact us for information.
⇒
For the maintenance parts separately sold, refer to the Maintenance Part,
Chapter 1 "1. Maintenance Parts and Standard Intervals of Inspection/
Replacement" on page 145.
Fiber Scope
This ber scope is used to check the incident status to the optical ber. Purchase it
as required.
⇒
When using the ber scope, the hatched portion shown in the following gure is
not used. Remove this portion. The hatched portion is xed with a screw.