6
First-Time User Checklist (Continued)
For your safety, and to prevent damage to the machine, please verify the following:
9. DRO arm and DRO are securely
mounted to the machine.
Yes/No
10. The DRO Input-voltage switch on
the power-entry module (back
panel) is set to the correct input
voltage.
Yes/No
11. DRO is properly grounded. (Earth
ground to wall conduit or water
pipe, for example, not grounded
to the machine).
Yes/No
12. All cables are off the floor and out
of the range of moving parts.
Yes/No
To Next Page
Loading...
