Anilam Wizard 900 - Absolute Zero Set - F 01

23
Absolute Zero Set – F 01
F 01 allows you to establish a part zero. The DRO clears all axis counters, both absolute
and incremental, to zero.
NOTE: This feature does not clear a preset dimension entered in Incremental Mode.
To clear a dimension entered in Incremental Mode; refer to Recalling a Preset
Dimension.
To reset all axes to zero:
1. Press
The DRO temporarily displays the following in the message window:
Abs
set
and then clears the axis
displays.
X .0000
.0000