Anilam Wizard 900 - Correction Factor OFF;ON - F 04

47
Correction Factor OFF/ON – F 04
F 04 allows you to turn the Correction Factor (CF) OFF or ON selectively and store the
values in memory.
To turn the correction factor ON or OFF:
1. Press to select the feature.
The DRO displays the following in the message window:
Cf
on--off
2. Press the desired axis key to select the axis to enable or disable CF.
3. If necessary, turn the correction factor ON or OFF for any axis.
To clear the correction factor from memory:
1. Press
The DRO displays the following in the message window:
Set
corfct
2. Press the desired axis key to select the axis to clear.
3. Press the axis key twice to clear the CF.
4. Press