Anilam Wizard 900 - Recalling Bolt-Hole Pattern Function (450 Only)

90
Advanced (ADV) Functions Key (Continued)
Recalling Bolt-Hole Pattern Function (N/A for 900,
Lathe Mode)
The Recall Key (RCL) allows you to recall a maximum of 10 previously programmed
bolt–hole patterns.
To recall bolt-hole pattern number 1 programmed in the previous section:
1. Press
ADV
repeatedly to scroll through
the Advanced Functions list.
When the DRO displays the following in the message window:
Bolt hole
2. Press
The DRO displays the following in the message window:
BHP NUMBER
3. Press
ENT