144
RS-232 Setup
(With I/O Option Only) – F 27 (Continued)
The available selections are:
q NO PARITY (default)
q EVEN PARITY
q ODD PARITY
4. Press
+
_
repeatedly to scroll through
the options.
5. Press to set the parity.
The DRO displays the following in the message window:
The available selections are:
q 8 Data Bit (default)
q 7 Data Bit
NOTE: If you selected NO PARITY, you can only select 8 DATA-BIT.
6. Press
+
_
repeatedly to scroll through
the options.
7. Press to set the data bits.
To Next Page
Loading...
