Anritsu MT8802A - Page 115

7-21
7.5 Outline of Displayed Screen
[1] “Exit” bar Restores the screen to the “Initial Menu Screen” shown in Fig. 7-1. The bit of the
measurement item selected for each frame is displayed in hexadecimal in item [6]
“Measure Items (Hex)” on the Initial Menu screen.
[2] N_Band CDMA Measurement Items (“N_Band CDMA” measurement item selection field)
Lists items to be measured by the Narrow-Band CDMA measurement software pro-
gram.
[3] IS136 Measurement Items (“IS136” measurement item selection field)
Lists items to be measured by the IS136 measurement software program.
[4] GSM Measurement Items (“GSM” measurement item selection field)
Lists items to be measured by the GSM measurement software program.
[5] PDC Measurement Items (“PDC” measurement item selection field)
Lists items to be measured by the PDC measurement software program
(MX880216A).
[6] [Frame All] checkbox Selection of this checkbox results in the selection of all the measurement items in the
frame.
[7] PHS Measurement Items (“PHS” measurement item selection field)
Lists items to be measured by the PHS measurement software program (MX880217A).