Arbiter Systems 1084A - Page 20

xx LIST OF TABLES
C.4 Option 19, Second RS-232 Port Pin Locations . . . . . . . . . . . . . . . . . . . . . . 139
C.5 Option 20A, Four Fiber Optic Output Configuration . . . . . . . . . . . . . . . . . . 142
C.6 Option 23, Sample Rates, f
LCM
= 384 × f
base
. . . . . . . . . . . . . . . . . . . . . . 145
C.7 Option 23, Sample Rates, f
LCM
= 3200 × f
base
. . . . . . . . . . . . . . . . . . . . . 145
C.8 Option 23, Output Signal Selection Jumper Settings . . . . . . . . . . . . . . . . . . 149
C.9 Example, Output Load and Loop Distance Matrix . . . . . . . . . . . . . . . . . . . 153
C.10 Option 28, B2 Broadcast Time Deviation Values . . . . . . . . . . . . . . . . . . . . 163
C.11 Option 29, Operating Modes of SSR Outputs . . . . . . . . . . . . . . . . . . . . . . 167
C.12 Option 29, Output Connectors and Setup Jumpers . . . . . . . . . . . . . . . . . . . 168
C.13 Option 32/33, Jumper Truth Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
C.14 Null-Modem Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
C.15 Option 34 LED Indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
C.16 Option 36 Output Connector Jumper Settings . . . . . . . . . . . . . . . . . . . . . . 225