94
About Auto Mode
This mode is supposed to use in production line testing.
By sending/receiving CDC message, HEC function search, control of connected devices and ping commands
transmission automatically.
《Setting item》
Select Test Sequence
0 Sample1
(1) Sequence (0/1)
1 Sample2
(2) Target Logical Addr Set CEC Logical Address of DUT (divide under test).
(3) Target IP Address Set IP address of DUT.
《Details of test sequence》
Sample1 ： VG main unit becomes Activator, and execute Activation.
Sample2 ： DUT becomes Activator and execute Activation to VG main unit.
To Next Page
Loading...
