ASTRO VG-873 - SCART Setting Procedure

Chapter 4 INTERFACE SETTINGS
179
4.11.2 SCART setting procedure
<SCART setting procedure>
(1)
Select Program Edit using
MENU
or
INC
DEC
, and then press
SET
.
(2)
Select Output (TIM) using
or
INC
DEC
, and then press
SET
.
(3)
Select Analog Output using
or
INC
DEC
, and then press
SET
.
(4)
Select SCART using
or
INC
DEC
,
and then press
SET
.
(5)
Select the items using
or
INC
DEC
,
and then press
SET
.
<Inputting the parameters>
Select the parameters using
or
INC
DEC
, and then press
SET
.
Alternatively:
Select the parameters using the number keys
(
0/STATUS
to
9/F
), and then press
SET
.
For further details on the parameters, refer to <SCART
setting parameters>.