ASTRO VG-873 - List of Error Messages

557
1
1
3
3
LIST OF ERROR MESSAGES
13.1 Media-related error
Code (HEX) Error message Description
217 Flash ROM(User) Full There is not enough free space in the internal memory.
228 No CF-Card The CF card has not been inserted.
229 CF-Card Unformatted The CF card has not been formatted.
22A CF-Card Full There is not enough free space on the CF card.
22C OPT Data File Error Error in the optional pattern data.
22F Image Data File Error Error in the image data.
233 Audio Flash Data Already Exist The audio data has already been registered.
235 Audio Flash File Error Error in the audio data.
236 Audio Flash Data Full
The maximum amount of audio data which can be registered has
been exceeded.
13.2 General error
Code (HEX) Error message Description
302 ‘H-Timing DotClock’ Over Limit Dot clock in the horizontal timing data is outside the setting range.
303 ‘H-Timing Frontp’ Over Limit Frontp in the horizontal timing data is outside the setting range.
305 ‘H-Timing HD’ Over Limit
HDstart+HDwidth in the horizontal timing data is outside the setting
range.
307 ‘H-Timing Period’ Over Limit Period in the horizontal timing data is outside the setting range.
308 ‘H-Timing Disp’ Over Limit Disp in the horizontal timing data is outside the setting range.
309 ‘H-Timing Sync’ Over Limit Sync in the horizontal timing data is outside the setting range.
30A ‘H-Timing Backp’ Over Limit Backp in the horizontal timing data is outside the setting range.
30B ‘H-Timing Blanking’ Over Limit Blanking in the horizontal timing data is outside the setting range.
30C H-Frequency Over Limit
The horizontal sync frequency in the horizontal timing data is outside
the setting range.
30D ‘H-Timing’ Data Error Error other than those described above in the horizontal timing data.
310 ‘Output’ Data Error” Error in the output condition data.
311 ‘Character’ Data Error” Error in the character pattern data.
312 ‘Cross Hatch’ Data Error” Error in the crosshatch pattern data.
313 ‘Dot’ Data Error” Error in the dot pattern data.
314 ‘Circle’ Data Error” Error in the circle pattern data.