ASTRO VG-873 - Data Initialization

Chapter 10 OTHER FUNCTIONS
449
10.4 Data initialization
Initialization restores the system settings and short-cut data to the factory settings.
10.4.1 Initializing the system settings
This operation restores the system settings to the factory settings.
(1)
Select Maintenance using
MENU
or
INC
DEC
, and then press
SET
.
(2)
Select INITIALIZE: Configuration using
or
INC
DEC
, and then press
SET
.
(3)
Press
SET
to execute initialization.
:
:
:
:
:
:
:
:
:
Initialization is completed.
↓
↓
(4) Turn off the generator’s power, and restart the generator.
 Performing this operation initialized all the data stored in the internal memory.
 The generator must be re-started after initialization.
CAUTION