ASTRO VG-873 - V-By-One HS Setting Procedure

Chapter 4 INTERFACE SETTINGS
217
4.13.2 V-by-One HS setting procedure
<V-by-One HS setting procedure>
(1)
Select Program Edit using
MENU
or
INC
DEC
, and then press
SET
.
(2)
Select Output using
or
INC
DEC
,
and then press
SET
.
(3)
Select Digital Output using
or
INC
DEC
, and then press
SET
.
(4)
Select V-by-One HS using
or
INC
DEC
, and then press
SET
.
Select the items using or
INC
DEC
,
and then press
SET
.
(5)
<Inputting the parameters>
Select the parameters using
or
INC
DEC
, and then press
SET
.
Alternatively:
Select the parameters using the number keys
(
0/STATUS
to
9/F
), and then press
SET
.
For further details on the parameters, refer to the table
below.