Chapter 6 PATTERN SETTINGS
305
When CUSTOM has been selected as the Type
setting
<Detailed settings of customized patterns>
Select CUSTOM using or
INC
DEC
,
and then press
SET
.
Select the items using or
INC
DEC
,
and then press
SET
.
(8)
<Inputting the parameters>
Select the parameters using or
INC
DEC
, and then press
SET
.
Alternatively:
(
0/STATUS
to
9/F
), and then press
SET
.
For further details on the settings, refer to <Table of ramp
pattern setting items> below.
To Next Page
Loading...
