62
<List of automatically selected items>
• If program data has been saved when Auto Select is set to ON, the values which were set by
automatic selection will be saved.
• A dash (“-”) denotes that the value of the original setting is used.
Item Setting/reference section
AVI InfoFrame
AFD pattern (see “6.7 Aspect ratio patterns”)
now displayed
Setting other than the
one given on the left
Active Format Information Valid -
Active Format Aspect
The setting accords with the AFD > Type setting.
-
Top Bar Value calculated from AFD, Timing setting -
Bottom Bar
Left Bar
Right Bar
RGB or YCbCr
The setting accords with the HDMI > Video Format setting.
Picture Aspect The setting accords with the HDMI > AVI InfoFrame > Video Code
setting. (EIA/CEA-861 standard met)
Repetition
The setting accords with the H-Timing > Repetition setting.
Audio InfoFrame
The setting accords with the Digital Audio > Source setting.
Ext.ANALOG to L-PCM
Int.L-PCM
Ext.I2S L-PCM
(Option)
Ext.ANALOG to DSD Int.DSD
(Option)
Setting
other than
the one
given on
the left
Sampling Frequency - 44.1 kHz
The DSD
File
informatio
n is used.
-
Channel Count
The setting accords with the number of channels set to ON
by Digital Audio > Output Channel.
0 1 2 to 8
Refer StreamHeader 2ch 2 to 8ch
-
ACP Packet
The setting accords with the ACP Packet > ACP_Type setting.
DVD-Audio
Setting other than the
one given on the left
DVD-Audio_Type 1 0
Copy_Permission - 0 (Copy Freely)
Copy_Number - 0 (1 copies)
Quality - 0
Transaction - 0 (Not Present)
ISRC Packet
A The setting accords with the ACP Packet > ACP_Type setting.
DVD-Audio
Setting other than the
one given on the left
OFF/ON ISRC1 - OFF
ISRC2
The setting accords with the ISRC Packet >
ISRC_Cont setting.
0 1
OFF -
OFF
To Next Page
Loading...
