AT&T PC 6300 - Page 345

n
n
n
n
n
DIAGNOSTICS
n
n
n
n
n
n
n
n
n
n
n
An explanation of the displayed information follows:
• PASS# = Number of test cycle.
• #BAD = Number of memory bytes under test.
• SEGMENT = Segment of memory under test.
• OFFSET = Last address of tested memory.
• WRITTEN = Data bytes written in memory.
• READ = Data bytes read from memory.
504 Memory Disk Transfer Test through DMA Operations
(only on System Test).
The following message is displayed when an error occurs during
the Memory/Disk Transfer Test (data block transfer). This error
is detected only for the System Test package.
504 - MaNDCHROME/CQLQR VIDEO SYSTEM
MEMORY/DISK TRANSFER TEST THROUGH DMA OPERATIONS ERROR
1 '4000 'B800 '0 'SSSS 'FEOO
PASS* 'BAD SEGMENT OFFSET WRITTEN READ
An explanation of the displayed information follows: -
• PASS# = Number of test cycle.
• #BAD = Number of data bytes to transfer.
• SEGMENT = Segment of memory under test.
• OFFSET = Initial address of memory.
• WRITTEN = Data pattern written in memory.
• READ = Data pattern read from memory.
4-139