Atlas Copco PowerMACS 4000

Basic Functions
9836 3521 01 101
Standard + Table layout
Using the same variable settings but with Type of layout set to "Standard + Table" and Header
frequency to 2 gives the below printout:
Station: Stn 01 Time: 011030 09:40:58 Status: OK
Bolt No Bolt T Bolt A Status Step No Peak T A
----------------------------------------------------------
1 15.1 435 OK 1 2.4 125
2 15.1 310
2 15.2 436 OK 1 2.5 124
2 15.2 312
Station: Stn 01 Time: 011030 09:40:58 Status: OK
1 15.1 435 OK 1 2.4 125
2 15.1 310
2 15.2 436 OK 1 2.5 124
2 15.2 312
Station: Stn 01 Time: 011030 09:40:58 Status: OK
Bolt No Bolt T Bolt A Status Step No Peak T A
-----------------------------------------------------------
1 15.1 435 OK 1 2.4 125
2 15.1 310
2 15.2 436 OK 1 2.5 124
2 15.2 312
Station: Stn 01 Time: 011030 09:40:58 Status: OK
1 15.1 435 OK 1 2.4 125
2 15.1 310
2 15.2 436 OK 1 2.5 124
2 15.2 312