Basic Functions
9836 3521 01 107
Enter the Group Name, use the controls located in the Set Access On All frame to set the access of all
forms to No Access, Read or Write. It is then possible to select access level for each ToolsTalk
PowerMACS window by selecting the access level in the Form Access list.
3.8.2 Registering users
Use menu item File-Security-Users to register a new user, or to check or change data for an existing
user.
The list contains current users.
To remove a user, select the name from the list and press Remove.
Press New… to add a new user.
To Next Page
Loading...
Need help?
General
