Peripheral Devices
540 9836 3521 01
8.13.4.4 SATT Comli
Checksum is calculated as XOR for all bytes from the first byte after STX up until and including ETX.
Data bytes have reverse bit order, i.e. bit7 = bit0, bit6 = bit1 etc. PowerMACS will respond to all telegrams
independent of Destination from XD.
Reading 5 integers at address 500
Writing 5 integers at address 0
* Destination, MSB, „0‟
* Destination, MSB, „0‟
* Destination, MSB, „1‟
* Destination, MSB, „1‟
Address, digit 1, „0‟
Address, digit 1, „0‟
Address, digit 2, „1‟
Address, digit 2, „0‟
Address, digit 3, „F‟
Address, digit 3, „0‟
Address, digit 4, „4‟
Address, digit 4, „0‟
Destination, MSB, „0‟
Destination, MSB, „0‟
Destination, MSB, „0‟
Destination, MSB, „0‟
Address, digit 1, „0‟
Address, digit 2, „1‟
Address, digit 3, „F‟
Address, digit 4, „4‟
To Next Page
Loading...
Need help?
General
