Atlas Copco PowerMACS 4000 User Manual

Tightening
9836 3521 01 345
6.5.5 Step – Rejects
The Reject Management (RM) function is used for automatic repair of failed steps. Most of the RM
settings for a step can be found in the Rejects group.
When a failed step is detected the RM performs the following:
1. Checks bolt status
2. Decides what to do
3. Starts repair
4. If problem was correctable, continues with status OKR
5. If not correctable, terminates or continues with status NOK

Atlas Copco PowerMACS 4000 Specifications

General

Brand	Atlas Copco
Model	PowerMACS 4000
Category	Power Tool
Language	English