Basic Functions
108 9836 3521 01
The following dialog box is shown.
Enter Name, Password, and select Group. Press OK to register the user.
To change data for an existing user, select the name from the list and press Change…. The same dialog
box appears as for a new user. Change the data and press OK.
Recommendation: when security is used the group for user “Anonymous” must be changed from
Administrators to a group with lower access, preferable the group “No Access” should be used.
3.8.3 Login and Logout
When a new user is about to start to work with the system he should log in. This can be done in either of
the following ways:
Pressing button on the toolbar (if shown)
Using the menu item File-Login
At log in the following dialog box is displayed:
If the name and password is correct the user will be let in. The name of current user is presented on the
status bar, down to the right.
When the user is finished with his work he should log out to prevent other users from making any
unwanted changes. This can be done in the same way as for log in.
To Next Page
Loading...
Need help?
General
