Tightening
356 9836 3521 01
An error has occurred and there
is at least one bolt to terminate
An error has occurred and there
is no bolt to terminate but at least
one bolt to repair
The terminate action is
ready and there is at least
one bolt to repair
A new error occurred and
the Failure during repair
or Fatal failure settings
says there is at least one
bolt to terminate
All bolts
ready with
repair
Evaluation of all bolts
using First and Fatal
failure gives that there is
no bolt to terminate but at
least one bolt to repair
Evaluation of all bolts using First
or Fatal failure gives that there is
at least one bolt to terminate
Evaluation of all bolts using
First and Fatal failure gives
that next step in the main
program should be started
A new error occurred
and the Failure during
repair settings says
there is no bolt to
terminate but at least
one to repair
The terminate action is
ready and there is no bolt
to repair
To Next Page
Loading...
Need help?
General
