Atlas Copco PowerMACS 4000

Tightening
9836 3521 01 389
totally independent from all steps and check, etc. There are no limits for this variable.
Bolt T try 1
Bolt T try 2
Bolt T try 3
Bolt T try 4
Bolt T try 5
Bolt T for each evaluation of the monitoring. "Bolt T try 1" is from the first evaluation, "Bolt T
try 2" from the second evaluation and so on. Can be usefull together with
rejectmanagement to see the original measurement value that caused the cycle to repair.
The value in Bolt T will always correspond to the last used of these variables.
Bolt A try 1
Bolt A try 2
Bolt A try 3
Bolt A try 4
Bolt A try 5
Bolt A for each evaluation of the monitoring. "Bolt A try 1" is from the first evaluation, "Bolt
A try 2" from the second evaluation and so on. Can be usefull together with
rejectmanagement to see the original measurement value that caused the cycle to repair.
The value in Bolt A will always correspond to the last used of these variables.
Bolt var. 01..40 T
General cycle data variables for the checks, scaled as Torque if different torque units are
selected in reporters.
Bolt var. 41..80
General cycle data variables for the checks