Atlas Copco PowerMACS 4000

Peripheral Devices
9836 3521 01 549
eDevSecondary = 1
Communicate with target TC's secondary API device
CDStatusEnum
This enumerator is used to indicate status of Cycle Data or Trace.
Constant
Description
eStatusNOK = 0
Not OK
eStatusOK = 1
OK
eStatusOKRepaired = 2
OK but Repaired
eStatusStopTerminateNOK = 3
Stop and Terminate, not OK
eStatusNOKRM = 4
Not OK by Reject Management
RunStatusEnum
This enumerator is used to indicate the status for a station or bolt when it is running
Constant
Description
eRunNoStatus = 0
No status
eRunWorking = 1
Working
eRunIdleOK = 2
Idle and OK
eRunIdleNOK = 3
Idle and not OK
eRunOutOfOrder = 4
Out of order
eRunIdleNOKRM = 5
Idle and not OK by Reject Management
eRunDisconOK = 6
Disconnected and OK
eRunDisconNOK = 7
Disconnected and not OK