Atlas Copco SMARTROC D65 TIER 4 FINAL User Manual

SmartROC D65 Tier 4 Final 6 Hydraulic systems
139
A
Breather filter
The breather filter must be replaced as set forth in the maintenance schedule and also if it
is severely fouled.
!
NOTE: If the breather filter becomes covered in oil it will be ruined. This can happen if
the tank is overfilled. The filter must then be changed.
Changing the breather filter
1.
Wash clean on and around the filter (A).
2.
Unscrew the old filter.
3.
Fit a new filter.
4.
Tighten the filter by hand.

Atlas Copco SMARTROC D65 TIER 4 FINAL Specifications

General

Brand	Atlas Copco
Model	SMARTROC D65 TIER 4 FINAL
Category	Industrial Equipment
Language	English