Name: Atlas Copco SMARTROC D65 TIER 4 FINAL
Brand: Atlas Copco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

SmartROC D65 Tier 4 Final 7 Feeder

143

7.3 Climbing chain

7.3.1 Lubricating the sprocket wheel and checking the climbing chain

cover.

Climbing chain, sprocket wheel and climbing chain cover

The climbing chain's gear (2) is lubricated by means of filling 2 to 3 pump strokes of grease

in the grease nipple (3) on the gear's shaft.

If the climbing chain cover (1) is worn then it must be replaced.

After a while the chain links will start to chafe against the jack chain cover. When this takes

place, replace the jack chain cover.

Questions and Answers:

Need help?

Do you have a question about the Atlas Copco SMARTROC D65 TIER 4 FINAL and is the answer not in the manual?

Atlas Copco SMARTROC D65 TIER 4 FINAL Specifications

General