Atlas Copco SMARTROC D65 TIER 4 FINAL User Manual

SmartROC D65 Tier 4 Final 13 Oil and fuel
191
!
NOTE: Do not use other types of grease, as some of them are not miscible.
13.11.6 Traction gears, carrier rollers
Use mineral-based transmission oil with EP additive to ISO VG class 220. Meets ACMA
specification for R & O EP oils. Classified as ISO-L-CKC according to ISO 6743/6 and SS-
ISO/TR 3498.
13.11.7 Oil recommendations for two-stage compressor
Atlas Copco recommends only using Atlas Copco PAROIL for the two-stage compressors.
Use of another oil is at customer's own risk
The type of PAROIL should correspond to the table below. If the ambient temperature per-
mits, then PAROIL S XTREME should be used in the first instance.
Ambient temperature Oil
Below +30 °C PAROIL S
Above -10 °C PAROIL S EXTREME
Never mix oils of different brands.
13.11.8 Coolant
Never mix propylene with ethylene glycol. Use only ready-mixed coolant that meets ASTM
with DG210.

Atlas Copco SMARTROC D65 TIER 4 FINAL Specifications

General

Brand	Atlas Copco
Model	SMARTROC D65 TIER 4 FINAL
Category	Industrial Equipment
Language	English