EasyManua.ls Logo

AudioCodes Mediant 800 - HA Network Monitor Alarm

AudioCodes Mediant 800
195 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER7 SNMP Traps
Mediant 800 SBC | SNMP Reference Guide
Alarm acHASystemSwitchOverAlarm
switchover
HA Network Monitor Alarm
Table 7-14: acHANetworkMonitorAlarm
Alarm acHANetworkMonitorAlarm
OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.136
Description The alarm is sent when all previously reachable destinations configured
for a specific row in the HA Network Monitor table (for the HA Network
Monitor feature) are now unreachable (i.e., none of them reply to the
device's pings).
For configuring the HA Network Monitor feature, refer to the User's
Manual.
Default
Severity
Major
Source Varbind
Text
Board#1/NetworkMonitor#X
Event Type communicationsAlarm
Probable Cause connectionEstablishmentError
Severity Condition Text
Corrective
Action
Major All destinations of a specific row
in the HA Network Monitor table
that replied in the past to the
device's pings are now
"unreachable"
"Destination/s
<peer destination
IP address(es)>
is/are
unreachable"
-
Cleared At least one of the
"unreachable" destinations
replies to the device's pings and
is now "reachable", or the row in
the HA Network Monitor table
has been deleted
- -
- 113 -

Table of Contents

Other manuals for AudioCodes Mediant 800

Related product manuals