AudioCodes Mediant 800 - Analog Port High Temperature Alarm

CHAPTER7 SNMP Traps
Mediant 800 SBC | SNMP Reference Guide
Alarm acAnalogPortSPIOutOfService
Text
Event
Type
physicalViolation
Probable
Cause
equipmentMalfunction
Alarm
Severity
Condition Text Corrective Action
Major Analog port
has gone
out of
service
"Analog
Port SPI out
of service"
■ No corrective action is required.
■ The device shuts down the port and
activates it again when the Serial Peripheral
Interface (SPI) connection returns.
Cleared Analog port
is back in
service
- -
Analog Port High Temperature Alarm
The alarm is applicable only to analog interfaces.
Table 7-47: acAnalogPortHighTemperature
Alarm acAnalogPortHighTemperature
OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.47
Default Severity Major
Source Varbind Text System#0/analogports#<n>, where n is the port number
Event Type physicalViolation
Probable Cause equipmentMalfunction
Severity Condition Text Corrective Action
Major Analog device has
reached critical
temperature.
Device is
"Analog Port
High
Temperature"
■ No corrective
action is required.
■ The device shuts
- 150 -