CHAPTER7 SNMP Traps
Mediant 800 SBC | SNMP Reference Guide
HA System Configuration Mismatch Alarm
Table 7-12: acHASystemConfigMismatchAlarm
Alarm acHASystemConfigMismatchAlarm
OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.34
Description The alarm is sent when the configuration of the modules in the High
Availability (HA) system is not identical, causing instability.
Default
Severity
Major
Source
Varbind
Text
System#0/Module#<m>, where m is the blade module’s slot number
Event Type processingErrorAlarm
Probable
Cause
configurationOrCustomizationError
Severity Condition Text Corrective Action
Major HA feature is active: "Configuration
mismatch in the
system:"
The actions for the
conditions are
described below.
License Keys of Active and
Redundant modules are
different.
"Active and
Redundant modules
have different feature
keys."
Update the Feature
Keys of the Active
and Redundant
modules.
The Active module was
unable to pass on to the
Redundant module the
License Key.
"Fail to update the
redundant with
feature key."
Replace the Feature
Key of the
Redundant module –
it may be invalid.
License key of the
Redundant module is
invalid.
"Feature key did not
update in redundant
module."
Replace the Feature
Key of the
Redundant module –
it may be invalid.
Cleared Successful License Key
update
"The feature key was
successfully updated
in the redundant
module"
-
- 111 -
To Next Page
Loading...
Need help?
General
