AudioCodes Mediant 800 Reference Guide

CHAPTER7 SNMP Traps
Mediant 800 SBC | SNMP Reference Guide
Alarm acNTPServerStatusAlarm
Protocol (NTP) server. its IP address is
configured
incorrectly in the
device).
Minor No communication
to NTP server after
the time was already
set once.
- -
Ethernet Link Alarm
Table 7-37: acBoardEthernetLinkAlarm
Alarm acBoardEthernetLinkAlarm
OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.10
Description The alarm is sent when an Ethernet link(s) is down. The alarm is
sent regardless of the number of ports configured in an Ethernet
Group; as soon as an Ethernet port (link) goes down, the alarm is
sent.
Default Severity Critical
Source Varbind Text Board#<n>/EthernetLink#0 (where n is the slot number)
This trap relates to the Ethernet Link Module (the #0 numbering
doesn't apply to the physical Ethernet link).
Event Type equipmentAlarm
Probable Cause underlyingResourceUnavailable (56)
Severity Condition Text
Corrective
Action
Minor Ethernet Group
with two Ethernet
ports and only one
is down.
"Ethernet link alarm.
LAN port number <n> link
is down"
(where n is the port
number)
1. Ensure
that the
Ethernet
cables are
plugged
into the
chassis.
2. Check the
- 141 -

AudioCodes Mediant 800 Specifications

General

Protocols	SIP, H.323
Digital Interfaces	1/2 E1/T1 PRI
Management	Web, CLI, SNMP
Mounting	19-inch rack
Codecs	G.711, G.729, G.722, G.723.1
Power Supply	100-240V AC
Operating Temperature	0 to 40°C
Storage Temperature	-25 to 70°C
Humidity	10% to 90% non-condensing