EasyManuals Logo

AudioCodes Mediant 800 Reference Guide

AudioCodes Mediant 800
195 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #180 background imageLoading...
Page #180 background image
CHAPTER7 SNMP Traps
Mediant 800 SBC | SNMP Reference Guide
Link Up Trap
Table 7-72: linkUp
Event linkUp
OID 1.3.6.1.6.3.1.1.5.4
MIB IF-MIB
Description The alarm is sent if the operational status of a communication link changes
from “down”. Categorized by the RFC as an “enterprise-specific trap”.
Link Down Trap
Table 7-73: linkDown
Event linkDown
OID 1.3.6.1.6.3.1.1.5.3
MIB IF-MIB
Description The alarm is sent if a communication link failure is detected. Categorized by
the RFC as an “enterprise-specific trap”.
Enhanced BIT Status Trap
Table 7-74: acEnhancedBITStatus
Event acEnhancedBITStatus
OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.18
Description The alarm is sent for the status of the BIT (Built In Test). The
information in the trap contains blade hardware elements being
tested and their status. The information is presented in the
Additional Info fields.
Default Severity Indeterminate
Source Varbind Text BIT
Event Type Other
Probable Cause other (0)
Alarm Text Notification on the board hardware elements being tested and
- 171 -

Table of Contents

Other manuals for AudioCodes Mediant 800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant 800 and is the answer not in the manual?

AudioCodes Mediant 800 Specifications

General IconGeneral
ProtocolsSIP, H.323
Digital Interfaces1/2 E1/T1 PRI
ManagementWeb, CLI, SNMP
Mounting19-inch rack
CodecsG.711, G.729, G.722, G.723.1
Power Supply100-240V AC
Operating Temperature0 to 40°C
Storage Temperature-25 to 70°C
Humidity10% to 90% non-condensing

Related product manuals