EasyManua.ls Logo

AudioCodes Mediant 800 - HTTP Download Result Trap

AudioCodes Mediant 800
195 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER7 SNMP Traps
Mediant 800 SBC | SNMP Reference Guide
Event acPerformanceMonitoringThresholdCrossing
Description The alarm is sent every time the threshold of a Performance
Monitored object ('Minimum', 'Average', 'Maximum', 'Distribution
below/above/between thresholds', and 'Low and high thresholds') is
crossed. The severity field is 'Indeterminate' when the crossing is
above the threshold and 'Cleared' when it goes back under the
threshold. The 'Source' varbind in the trap indicates the object for
which the threshold is being crossed.
Note: To enable this trap functionality, set the ini file parameter
[PM_EnableThresholdAlarms] to [1].
Default Severity Indeterminate
Event Source <Performance Monitoring name> #<Managed Object ID>
For example: PM_gwIPGroupINVITEDialogs#7, refers to SIP INVITE
messages of IP Group ID 7.
Event Type other (0)
Probable Cause other (0)
Trap Text "Performance: Threshold trap was set”, with source = name of
performance counter or gauge which caused the trap
Status Changes
Condition A performance counter or gauge (for the attributes 'Minimum',
'Average', 'Maximum', 'Distribution below/above/between
thresholds', and 'Low and high thresholds') has crossed the high
threshold.
Trap Status Indeterminate
Condition A performance counter or gauge has returned to under the
threshold
Trap Status Cleared
HTTP Download Result Trap
Table 7-62: acHTTPDownloadResult
Event acHTTPDownloadResult
OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.28
- 163 -

Table of Contents

Other manuals for AudioCodes Mediant 800

Related product manuals