CHAPTER7 SNMP Traps
Mediant 800 SBC | SNMP Reference Guide
Event acWebUserAccessDisabled
access).
The Web security administrator must:
1. In the Web interface, access the Local Users table (Setup menu > Admin-
istration tab > Web & CLI folder > Local Users).
2. Identify in the table those users whose access has been denied.
3. Change the status of that user from Blocked to Valid or New.
Web User Activity Log Trap
Table 7-59: acActivityLog
Event acActivityLog
OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.105
Description The alarm is sent upon log (Syslog) generated by device indicating a Web
user action (configured by ActivityListToLog). The SNMP trap notification
functionality is enabled by the EnableActivityTrap parameter (refer to the
User's Manual).
Default
Severity
Indeterminate
Event Type other (0)
Probable
Cause
other (0)
Trap Text "[description of activity].User:<username>. Session: <session type>[IP
address of client (user)]."
For example:
“Auxiliary file loading was changed from ‘0’ to ‘1’, User:Admin. Session:
WEB [172.17.125.12]"
Note Activity log event is applicable to the following OAMP interfaces: SNMP,
Web, CLI and REST.
For SNMP activity, the username refers to the SNMP community string.
- 161 -
To Next Page
Loading...
Need help?
General
