CHAPTER7 SNMP Traps
Mediant 800 SBC | SNMP Reference Guide
Alarm acNERThresholdAlarm
than the Major
threshold).
Cleared NER is above the
configured Minor
threshold plus the
hysteresis.
No Route to IP Group Alarm
Table 7-54: acIpGroupNoRouteAlarm
Alarm acIpGroupNoRouteAlarm
OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.114
Description The alarm is sent when the device rejects calls to the destination IP
Group due to any of the following reasons:
■ Server-type IP Group is not associated with a Proxy Set, or it's
associated with a Proxy Set that is not configured with any
addresses, or the associated Proxy Set experiences a proxy keep-
alive failure (Gateway and SBC)
■ Poor Voice Quality - MOS (SBC only)
■ Bandwidth threshold has been crossed (SBC only)
■ ASR threshold has been crossed (SBC only)
■ ACD threshold has been crossed (SBC only)
■ NER threshold has been crossed (SBC only)
Source Varbind
Text
The object for which the threshold is crossed according to one of the
above-mentioned reasons. The text displayed for this alarm can be
one of the following:
■ "No Working Proxy" (acProxyConnectivity trap is sent)
■ "Poor Quality of Experience"
■ "Bandwidth"
■ "ASR" (see acASRThresholdAlarm)
■ "ACD" (see acACDThresholdAlarm)
■ "NER" (see acNERThresholdAlarm)
- 156 -
To Next Page
Loading...
Need help?
General
