AudioCodes Mediant 800 Reference Guide

CHAPTER6 Performance Monitoring
Mediant 800 SBC | SNMP Reference Guide
Performance Monitoring MIB
G
/
C
I
n
t
V
a
l
M
i
n
M
a
x
A
v
g
T
b
L
T
T
b
T
T
a
H
T
H
T
L
T
■ Source Name: PM_HALinkRedundantToActivePacketLossPercentage
Indicates packet loss (in %) on the HA
Maintenance interface from Redundant to
Active device, where 0% indicates no packet
loss.
■ High threshold:
acPMHAAttributesHALinkRedundantTo
ActivePacketLossPercentageHighThresh
old (1.3.6.1.4.1.5003.10.11.1.38.1)
■ Low threshold:
acPMHAAttributesHALinkRedundantTo
ActivePacketLossPercentageLowThresh
old (1.3.6.1.4.1.5003.10.11.1.38.2)
G 1
5
ü ü ü ü ü ü ü
ü
(
3
0
)
5
■ MIB Name: acPMHALinkActiveToRedundantPacketLossPercentageTable
■ OID: 1.3.6.1.4.1.5003.10.11.2.111.2
■ Source Name: PM_HALinkActiveToRedundantPacketLossPercentage
Indicates packet loss (in %) on the HA
Maintenance interface from Active to
Redundant device, where 0% indicates no
packet loss.
■ High threshold:
acPMHAAttributesHALinkActiveToRedu
ndantPacketLossPercentageHighThresh
old (1.3.6.1.4.1.5003.10.11.1.38.3)
■ Low threshold:
acPMHAAttributesHALinkActiveToRedu
ndantPacketLossPercentageLowThresh
old (1.3.6.1.4.1.5003.10.11.1.38.4)
G 1
5
ü ü ü ü ü ü ü
3
0
5
Performance Monitoring MIB for DSP Resource Utilization
The following table lists the SNMP MIB that reports the percentage of DSP resources utilized by
the device. Low and high thresholds can also be defined, which if crossed, the SNMP trap
event, acPerformanceMonitoringThresholdCrossing is sent by the device.
- 89 -

AudioCodes Mediant 800 Specifications

General

Protocols	SIP, H.323
Digital Interfaces	1/2 E1/T1 PRI
Management	Web, CLI, SNMP
Mounting	19-inch rack
Codecs	G.711, G.729, G.722, G.723.1
Power Supply	100-240V AC
Operating Temperature	0 to 40°C
Storage Temperature	-25 to 70°C
Humidity	10% to 90% non-condensing