EasyManuals Logo

AudioCodes Mediant 800 Reference Guide

AudioCodes Mediant 800
195 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #166 background imageLoading...
Page #166 background image
CHAPTER7 SNMP Traps
Mediant 800 SBC | SNMP Reference Guide
Alarm acIpGroupNoRouteAlarm
Alarm Text <Alarm Description Reason> as described above.
Event Type Quality Of Service Alarm
Probable Cause One of the reasons described above.
Severity Condition Text
Corrective
Action
Major When calls rejected to IP Group
due to any of the above-
mentioned reasons.
"IP Group is
temporarily
blocked.
IPGroup
(<name>)
Blocked
Reason:
<reason see
Source Varbind
Text>"
-
Cleared When calls are no longer rejected
due to the above-mentioned
reasons (i.e. when none of the
above reasons prevent a route to
the IP Group from being
established).
-
Intrusion Detection Alarms
This section describes the alarms concerned with the device's Intrusion Detection System (IDS)
feature.
IDS Policy Alarm
Table 7-55: acIDSPolicyAlarm
Alarm acIDSPolicyAlarm
OID 1.3.6.1.4.1.5003.9.10.1.21.2.0.99
Description The alarm is sent when a threshold of a specific IDS Policy rule is crossed for
the Intrusion Detection System (IDS) feature. The alarm displays the
crossed severity threshold (Minor or Major), IDS Policy and IDS Rule, and
the IDS Policy-Match index.
The alarm is associated with the MO pair IDSMatch and IDSRule.
- 157 -

Table of Contents

Other manuals for AudioCodes Mediant 800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant 800 and is the answer not in the manual?

AudioCodes Mediant 800 Specifications

General IconGeneral
ProtocolsSIP, H.323
Digital Interfaces1/2 E1/T1 PRI
ManagementWeb, CLI, SNMP
Mounting19-inch rack
CodecsG.711, G.729, G.722, G.723.1
Power Supply100-240V AC
Operating Temperature0 to 40°C
Storage Temperature-25 to 70°C
Humidity10% to 90% non-condensing

Related product manuals