AudioCodes MP-124 - Page 252

SIP User's Manual 252 Document #: LTRT-65412
MP-11x & MP-124
Parameter Description
SNMP Community String Parameters
Community String
[SNMPReadOnlyCommunityString_x]
Defines up to five read-only SNMP community strings (up
to 19 characters each). The default string is 'public'.
Community String
[SNMPReadWriteCommunityString_x]
Defines up to five read / write SNMP community strings
(up to 19 characters each). The default string is 'private'.
Trap Community String
[SNMPTrapCommunityString]
Community string used in traps (up to 19 characters).
The default string is 'trapuser'.
SNMP v3 Users Parameters
SNMP V3 Table
[SNMPUsers]
This ini file table parameter configures SNMP v3 users.
The format of this parameter is as follows:
[SNMPUsers]
FORMAT SNMPUsers_Index = SNMPUsers_Username,
SNMPUsers_AuthProtocol, SNMPUsers_PrivProtocol,
SNMPUsers_AuthKey, SNMPUsers_PrivKey,
SNMPUsers_Group;
[\SNMPUsers]
For example:
SNMPUsers 1 = v3admin1, 1, 0, myauthkey, -, 1;
The example above configures user 'v3admin1' with
security level authNoPriv(2), authentication protocol MD5,
authentication text password 'myauthkey', and
ReadWriteGroup2.
Notes:
 This parameter can include up to 10 indices.
 For a description of this table's individual parameters
and for configuring the table using the Web interface,
refer to ''Configuring SNMP V3 Users'' on page 161.
 For an explanation on using ini file table parameters,
refer to ''Format of ini File Table Parameters'' on page
191.