Automationdirect.com prosense PPC5 Series - Page 327

16-7
PPC Manual Revision 1
Chapter 16: Software Functional Overview
RS-485 communication terminal (PPC5-1x01 models)
Connect the PC to the controller via the communication terminals on the back of the
unit.
This connection requires an RS485 converter (recommended model: USB-485M).
Reference Section 1.4.9 RS-485 Communication Interface Wiring (PPC5-1x01 Models)
Up to 31 connected slaves with a maximum length of 1200 m
Model: USB-485M (sold separately) is recommended.
RS485
converter
PC
Setting parameters
Parameter
symbol
Name
Display
level
Setting range
Menu
symbol
PSL










 
 


BPS








PRI




STP
 
DLN
 
ADR
 
