DL205 PLC USER MANUAL
Please include the Manual Number and the Manual Issue, both shown below,
when communicating with Technical Support regarding this publication.
Manual Number: D2-USER-M
Issue: 4th Edition, Rev. D
Issue Date: 10/17
Publication History
Issue Date Description of Changes
1st Edition 1/94 Original edition
Rev. A 9/95 Minor corrections
2nd Edition 6/97 Added DL250, downsized manual
Rev. A 5/98 Minor corrections
Rev. B 7/99 Added torque specs for base and I/O
Rev. C 11/99 Minor corrections
Rev. D 3/00 Added new PID features, minor corrections
Rev. E 11/00 Added CE information, minor corrections
Rev. F 11/01
Added surge protection info, corrected RLL and DRUM instructions, minor
corrections
3rd Edition 6/02
Added DL250–1 and DL260 CPUs, local expansion I/O, ASCII and
MODBUS instructions, split manual into two volumes
Rev. A 8/03 Extensive corrections and additions
4th Edition 11/08
Changed publishing software resulting in change of appearance, addition of IBox
instructions, changes to PID chapter, added info for ERM and EBC modules, other
changes as necessary
Rev. A 4/10 Extensive corrections and additions
Rev. B 2/13
Corrected number of memory registers needed in the print message instruction.
Added new transient suppression for inductive loads to Chapter 2.
Added H2-CTRIO2 and H2-ERM100 references.
Rev. C 4/17
Minor corrections with general updates.
ECEMAIL Decimal Status Codes added, Chapter 5
Rev. D 10/17 Minor corrections with general updates
To Next Page
Loading...
Need help?
General
