Avaya J100 Series - Page 211

Parameter name Default value Description
BS_CC_UNAVAIL_CODES Null Specifies codes that the agent
can select for the Unavailable
state. Use this parameter only if
XSI is disabled (XSI_URL is
empty).
You can enter the comma
separated list of the reason codes
and their descriptions in the
following format: code =
description. For example: 1=
coffee break, 2= Tea party, dnd=
Do Not Disturb
Note:
This parameter is available
in:
• Avaya J159 IP Phone
• Avaya J169/J179 IP Phone
BS_CC_AUTOMATIC_STATE 0 Specifies whether the agent state
changes on the phone
automatically when the agent logs
in and logs out of the phone. The
agent state is Sign in during log in
and Sign out during log out.
Options are:
• 0: The phone will not
automatically change the agent
state.
• 1: The phone will automatically
change the agent state.
Note:
This parameter is available
in:
• Avaya J159 IP Phone
• Avaya J169/J179 IP Phone
Table continues…
Feature configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 211
Comments on this document? infodev@avaya.com