Avaya J100 Series - Page 235

Parameter name Default value Description
MP_GROUPS_TO_LISTEN Null Defines the list of Multicast
Paging groups that the phone
listens to. A maximum of 10
paging groups can be listed.
The paging groups should be
separated with a comma (“,”), and
should be listed in the following
format:
IP:port:priority:label
where
• IP is the multicast IP address of
an MP group;
• Port is the IP port of a
Multicast Paging group, the
valid value is an even integer
ranging from 1024 to 65534;
• Priority is the priority of a
group. Allowed values are 1
through 16, with smaller values
indicating a higher priority;
• Label is a group label which is
displayed in notification
messages when the incoming
page from this group is played.
All the above-listed settings are
required.
For example,
SET MP_GROUPS_TO_LISTEN
“239.0.0.0:1208:1:Security,
239.1.2.3:1210:4:Sales”
Table continues…
Feature configuration
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 235
Comments on this document? infodev@avaya.com