Avaya J100 Series - Page 493

PHONEKEY
setting
Allowed
valuesname
Definition Additional parameters
guestlogin Guest Login
wmlbrowser WML browser
Line
(Type=line)
primary Primary line
appearance
Specify the required line appearance index
as attr1:
SET PHONEKEY
"Key=1;Type=line;Name=primary;attr1=
1"
sca Shared Call
Appearance
Specify the required shared line appearance
index as attr1 and shared line extension
as attr2:
SET PHONEKEY
"Key=1;Type=line;Name=sca;attr1=1;at
tr2=6837"
Autodial
(Type=autod
ial)
autodial Automatic dialing of
a phone number
Specify the required phone extension as
attr1:
SET PHONEKEY
"Key=1;Type=autodial;Name=autodial;a
ttr1=6837"
Note:
In Open SIP mode, automatic dialing
can be configured only by setting the
PHONEKEY parameter.
Enhanced local dialing rules can be
applied to automatic dialing by setting
the ELD_SYSNUM parameter in the
46xxsettings.txt file. To disable
enhanced local dialing rules, set
ELD_SYSNUM to 0.
Related links
BLF configuration modes on page 494
Setting Pre-configuration of keys on page 170
Pre-configuration of keys on page 239
Pre-configuration of keys parameter on page 240
PHONEKEY parameter values
April 2020 Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment 493
Comments on this document? infodev@avaya.com