Bailey Unicorn - Select Power Type; Select Fan Level; Heater Combi; Enter Start Time

85
HEATINGSYSTEMS
Oncethewatertemperatureisreached,the
roomisheatedagain.
* This symbol will ash until the required
watertemperatureisreached.
Select power type
• Usethecontrolknob/pushbuttontoselect
thesymbolinmenuline(3).
• Clicktochangetothesettinglevel.
• Usethecontrolknob/pushbuttontoselect
therequiredpowertype.
Clickthecontrolknob/pushbuttontoconrm
thevalue.
Symbol Operating mode Power type
a Gas/Diesel Gas/Diesel
b EL1  Electro
b+c EL2  Electro
a+b Mix1* Gas/Diesel+Electro
a+b+c Mix2* Gas/Diesel+Electro
*Mixedmode
Special aspects in the mixed mode
Interruptionofthepowersupply230v
Combi Gas: The heater automatically
switches to the gas mode.  As soon as the
230v power supply is connected, the heater
automatically switches back to the mixed
mode.
Malfunction in the combustion process (e.g.
lack of fuel)
Combi Gas  The heater automatically
switches
to the electro mode.  If the heater should
operateinthemixedmodeagain,thecauseof
themalfunctionneedstoberectied.Switch
the heater off and on again on the control
panel.
Select fan level
When the heater/air conditioning unit is
concerned.
• Usethecontrolknob/pushbuttontoselect
thesymbolinmenuline(3).
• Clicktochangetothesettinglevel.
• Usethecontrolknob/pushbuttontoselect
therequiredfanlevel.
• Click the control knob/push button to
conrmthevalue.
Heater Combi
Symbol Operating
Mode
Description
– Off Fanisswitchedoff
a Vent Circulating air: if no
deviceisinoperation
9 speed levels can
beselected
b Eco Lowfanlevel
c Mild Highfanlevel
d High Fastheatingofthe
room.Available,
ifthedifference
betweenselected
andcurrentroom
temperatureis>10
o
C
Settimer
• Usethecontrolknob/pushbuttontoselect
thesymbolinMenuline(4)
• Clicktochangetothesettinglevel.
Ifthetimerisactivated(ON),thetimerinthe
menuisshownasdeactivated(OFF).
Enter start time
• Use the control knob/push button to set
thehours,thentheminutes.