baxter Hillrom Proqressa+ - Infusion Support System (P158 A); Removable IV Pole (P7510 A); Infusion Support System; Removable IV Pole

Accessories
Progressa+ Bed Instructions for Use (216321 REV 2) 93
INFUSION SUPPORT SYSTEM (P158A)
WARNING:
Warning—To help prevent personal injury or equipment damage, obey these warnings:
• Warning—Do not exceed 20 lb (9 kg) load capacity (safe working load) of the infusion support
system (ISS) pole.
• Warning—Correctly attach the ISS pole; otherwise, it may fall.
• Warning—Uneven loading of the ISS pole could cause the contents to fall.
• Warning—When you lower the upper section of an ISS pole, always grasp and hold the upper
section of the pole before pulling the release knob.
• Warning—Do not mount infusion pumps on the lower section of an IV pole. Interference with
head section articulation could result.
The Infusion Support System (ISS) consists of a movable and adjustable IV pole. The pole supports IV
pumps or bags in a vertical orientation and raises or lowers the pumps or bags with respect to the bed
frame.
The head end of the bed has attaching points for two mobile Infusion Support Systems. Each Infusion
Support System can support one infusion pump plus two liters of intravenous solution.
The ISS pole installs in to one of the IV pole sockets with the P7515B adapter kit.
The P158A ISS IV pole is a removable, two section telescopic pole that installs at the head end of the bed
into an adapter that snaps into the receiver holes. The IV pole can hold 20 lb (9 kg).
REMOVABLE IV POLE (P7510A)
WARNING:
Warning—To help prevent injury and/or equipment damage, obey these warnings:
• Warning—Keep hands away from the connection between the sliding parts when raising and
lowering the movable portion of the IV pole.
• Warning—Exceeding the safe working load can cause injury or equipment damage.
The IV pole is a removable, three section, telescopic pole that installs at the head end of the bed, in the
hole provided. A permanently attached adapter is required. The IV pole can hold 40 lb (18 kg).
To install the standard IV pole, insert and rotate a quarter-turn clockwise. Removal is opposite of
installation.
CAUTION:
Caution—When lowering the upper section of an IV pole, always grasp and hold the upper section of
the pole before pulling the release knob.
NOTE:
Added height recommended for gravity drain applications.