EasyManua.ls Logo

baxter Hillrom Proqressa+ - Experience Pod Device (Overhead Arm) (P7546 A01)

baxter Hillrom Proqressa+
146 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Accessories
Progressa+ Bed Instructions for Use (216321 REV 2) 99
EXPERIENCE POD DEVICE (OVERHEAD ARM) (P7546A01)
WARNING:
WarningTo help prevent injury and/or equipment damage, obey these warnings:
Warning—Do not exceed the 1 kg (2.2 lb) load capacity of the Overhead Arm.
Warning—Do not remove or install the Overhead Arm assembly while it is in a position over a
patient.
Warning—Stay clear of pinch points and moving parts when putting the Overhead Arm in the
transport position.
Warning—Put the Overhead Arm in the transport position and make sure the power cord is
unplugged and stored correctly prior to transport.
Warning—Instruct patients to never use the Overhead Arm to assist them when they get in or
out or reposition themselves in the bed.
Warning—When the Overhead Arm is installed and you adjust the bed and/or head section
height, be careful that the arm does not contact the patient.
Warning—Before you remove the Overhead Arm, make sure the power cord is unplugged and
stored correctly.
4. If applicable, disable any lockout controls.
5. Adjust the IV Pole and transport handles, as applicable.
6. Install the headboard.
Item Description Item Description
A Personal Electronic Device (PED) cord
storage
C PED holder
BUSB charging port

Table of Contents

Related product manuals