baxter Hillrom Proqressa+ - Equipment Sockets; Pole Sockets

Bed Frame Features
Progressa+ Bed Instructions for Use (216321 REV 2) 85
EQUIPMENT SOCKETS
CAUTION:
Caution—To help prevent equipment damage, obey these cautions:
• Caution—The equipment sockets are not to be used for
overhead fracture frame equipment.
• Caution—Before moving the bed into any of the chair
positions, remove all equipment from the sockets at the
foot end of the articulating deck.
• Caution—While articulating into a Trendelenburg position,
make sure there is adequate headwall clearance.
Equipment sockets are provided at each corner of the deck to
attach equipment such as IV poles and infusion support.
IV POLE SOCKETS
WARNING:
Warning—To help prevent injury and/or equipment
damage, obey these warnings:
• Warning—Remove all equipment from the
foot-end equipment sockets before you put
the bed in the chair position.
• Warning—Make sure there is sufficient room
at the head end of the bed for equipment in
the sockets when you raise the bed or put the
bed into Trendelendburg/Reverse
Trendelenburg positions.
The Progressa+ Bed comes with four standard IV
pole sockets. Two are located at the head end and
two are located behind the footboard at the corners
of the foot end.
Head End
Foot End